What is Ball ring packing? What are the comments in society on the use of Bauer ring fillers in towers? Today, follow Suzhou Wojun Environmental Protection Technology Co., Ltd. to learn more.
Bauer ring filler is a new type of filler that has been developed to address some of the main shortcomings of the Rasch ring. It is made by opening eight rectangular small windows on the wall of a regular Rasch ring, with the small window blades overlapping at the center of the ring and the upper and lower window positions overlapping each other. The main difference between it and the Rasi ring packing is that there are rectangular window holes on the side wall, and the window blades of the window holes bend into the ring center. Due to the opening on the ring wall, the distribution performance of gas and liquid is greatly improved compared to the Rasi ring, especially the internal surface area of the ring can be fully utilized.
The use of Bauer ring packing can have greater surface area and porosity, increase the uniform distribution of fluid, change the range of liquid spray density, and improve the mass transfer effect. Nowadays, domestic public opinion polls on architecture and decoration are filled with some comments:
1. In order to meet the national demand for energy conservation and emission reduction, as well as the need for enterprises to reduce production costs, the application of the Bauer ring tower will inevitably improve enterprise efficiency and achieve the goal of rational utilization of energy.
2. Describe the characteristics of the polling filler and the shape of the filler in terms of heat. When choosing the packing for the Bauer ring, attention should be paid to the selection of the packing. If there are problems with the material or installation of the Bauer ring, it will greatly affect the distillation effect. Plastic materials with poor heat polling fillers have stability, but have poor corrosion resistance and batch processability. Metal Ball ring fillers solve the problem of poor thermal stability but easy corrosion. Ceramic Bauer ring fillers can not only solve temperature problems but also corrosion problems, but they are also brittle and heavy. The type of loose ring packing is easy to process, fill, and clean, but it is difficult to control the maximum moisture content of the packing. Most investments in individual structured packaging and polling devices are much higher than in random packaging.
3. When installing the Bauer ring packing tower, not only is the initial liquid distribution uniform, but it is also necessary to ensure the liquid distribution throughout the entire Bauer ring packing tower. This problem can be solved by installing a liquid redistribution device. The excellent liquid distribution can increase the free cross-sectional area of the gas channel, reduce the resistance of the gas channel, increase the operational flexibility, and reduce the mixing of foam and fog.
4. With the continuous development of the Bauer ring packing tower, the previously overlooked gas distribution problem is receiving attention. If conventional devices cannot meet the conditions for uniform gas flow into the bed, the grid must be installed on the Bauer ring packing tower to improve mass transfer efficiency.
5. The road layer support plate, pressure plate, the entire road section, and other tower components, such as liquid collectors, redistributors, and packaging machine roundabouts, are also important components to ensure tower energy efficiency.
6. When entering the Bauer ring distillation tower, do not overcool or overheat the material. Due to the almost absence of liquid phase in the Bauer ring packing tower, some sections of the tower are only used for heat exchange and lose their separation ability, thereby affecting the overall separation efficiency of the tower.
7. When using barges to supply or unload and rebuild old towers, please pay attention to the process conditions. After deformation, the position of each edge line must be aligned with the corresponding point in the vertical concentration distribution of the tower to ensure the composition of the material entering and exiting each edge line.
The disadvantage of the Bauer ring packing tower is that the Bauer ring packing has a high cost and is not suitable for use under low liquid loads, and the material should not contain suspended solids, adhesives, and polymers. It is not suitable for complex distillation processes, such as installing an intermediate reboiler or draining multiple pipelines.
The above are some comments from Suzhou Wojun Environmental Protection Technology Co., Ltd. on the use of Baoer ring packing tower in society, hoping to be helpful to everyone.
Suzhou Wojun Environmental Protection Technology Co., Ltd. mainly produces wire mesh defoamers, wire mesh corrugated fillers, orifice plate corrugated fillers, Bauer ring fillers, tower internals, and regular fillers. We are a professional manufacturer selling metal bulk fillers, metal regular fillers, and tower internals. We welcome buyers to choose and purchase.